STS kit from an LS1
Thread Starter
TECH Enthusiast
Joined: Sep 2004
Posts: 522
Likes: 0
STS kit from an LS1 Will this work on a 94 z28???
Off PurEvils car
T70 Turbo
OBX intercooler
all piping for intercooler
blowoff ,installed
front bracket/bumper support for intercooler
Pretty much everything needed for the STS kit and front mount turbo.
Maybe 2k miles on it tops.No problems with the kit,just going alot bigger.
You just need a fuel system and a strong motor
This system is not really meant for a stock motor,made 700rwhp on pump gas without maxing the turbo out.Made 600hp/600tq on 10lbs of boost. 560hp/560tq at 8lbs.
Off PurEvils car
T70 Turbo
OBX intercooler
all piping for intercooler
blowoff ,installed
front bracket/bumper support for intercooler
Pretty much everything needed for the STS kit and front mount turbo.
Maybe 2k miles on it tops.No problems with the kit,just going alot bigger.
You just need a fuel system and a strong motor
This system is not really meant for a stock motor,made 700rwhp on pump gas without maxing the turbo out.Made 600hp/600tq on 10lbs of boost. 560hp/560tq at 8lbs.
Launching!
Joined: Sep 2004
Posts: 265
Likes: 1
From: Norfolk, VA
you'd need to refab the headers unless the STS kit uses stock headers. Other than that, the chassis/body is mostly the same so I dont see why it wouldnt work. I'm sure you'd need to do some minor fabrication mods possibly, but nothing too major i wouldnt think.
i think a lot of fabrication would be needed on the charge pipes and the down pipe. The brackets for the intercooler might need to be fabbed up too. Just to let you know that the OBX intercooler isnt that great of a brand. PWR, Garrett, or Precision are my recommendations.
