SmokedOutZ28

iTrader: (35)

Im curious how many LT1 guys put 1.6 self aligning roller rockers on there car without changing valves and springs. i keep hearing about possible valve float or coil bind, i might be getting a deal on some but want to make sure that im not asking for trouble by installing these on my car. thanks for the help.

Compstall

iTrader: (5)

If you're using the stock cam, you can use a cheap set of LT4 springs.

SmokedOutZ28

iTrader: (35)

would i be good if i used the stock springs?

SSRZ28

iTrader: (3)

my friend is using stock springs but i would not recommend it. i dont think he has any problems but i finally talked him into the lt4 springs.

LT1Factor

I say while your there throw on the LT4 springs. Just make more sense

SmokedOutZ28

iTrader: (35)

you guys are right and it does make sense, im just wondering if anyone has gotten away with it? im probably gonna wait til i get new heads to put the rockers on but im just curious.

buffman

iTrader: (9)

Someone should make a sticky about roller rockers. As long as you're running the stock cam there's nothing wrong w/ throwing 1.6 rockers on the car. It would be a wise idea to upgrade valve springs while you're at it. Combination Motorsports sells a decent valve spring for Aluminum heads.

Matt