Whats your 1/4? List them Here
Havent run it myself but the friend i bought the 95Z from ran a 13.1@108.7mph on a 2.3 60ft using 275/50 15in DRs @28psi(
) and cookie cutters up front. It was his first time at the track so...... Best of 3 runs he made. i wasnt there but saw it on the vid he made. Only difference was he was running bullets off the headers compared to the full exhaust i have on it now
) and cookie cutters up front. It was his first time at the track so...... Best of 3 runs he made. i wasnt there but saw it on the vid he made. Only difference was he was running bullets off the headers compared to the full exhaust i have on it now 13.74@100.03 with a 2.049 60ft with mods in sig minus the cut out
I found out a couple days later after the run that intake elbow was ripped on the bottom so it was kind of curled up into the throttle body, so I'm pretty sure that wasn't helping me.
I found out a couple days later after the run that intake elbow was ripped on the bottom so it was kind of curled up into the throttle body, so I'm pretty sure that wasn't helping me.
Originally Posted by 1993CaMaRoZ28ofIdAhO
Sig TOday!!!!!!!!!
anyway i havnt ran with the new setup ill post some numbers when i do what i ran stock is in sig
the last time i ran on the track was about 11 years ago when i was living in New Joisey. i ran at E-Town (English Town). i had taken out the air filter, remove that P.O.S. air baffle from the fender, had a ThermoMaster chip from Hypertech and their 160* stat, plus had some Mickey Thompsons out back. i ran a 13.3 @ 100.some MPH. now that i am in Virginia i have not been to a track partly because the nearest 1/4 mile is 2-3 hours away. i also have 70 some thousand miles on it now and i am worried that she will not run much better now even with all the mods i have mad since.





