in other words sometime just before the rust buildup on the motor makes it nonfunctional.

 

thats cool, i just did the M6 swap to mine about 2 months ago.... pretty easy to do actually... you using street tires or DR's???

 

my thoughts exactly.......

 

Don't forget he is hookin a 1.63 60ft where as you are hookin a 1.93. So if you factor a 1.63 60ft into your time you should run about an 8.0 in the 1/8. Remember, every 10th in your 60ft is equal to two's tenths faster for ET.

 

well they use to sell pulleys... i look and see if i can find a vendor for them.

 

So if I have a 2.079 60 ft. at 13.49, and I then decrease my 60 ft. to 1.85, what would I be lookin at in the 1/4?

 

yes... thats true.. but that was on shitty fulda street tires... ive got nitto's ready... just havent been to the track yet... and that was on the old rims as well. the old 16X8....lol... so i was happy with the run...

 

You should be around a 13.0-13.1....

 

It sounds like you scored a factory freak, and are a good driver. Very impressive bolt-on times, imagine a cam .

 

it was a auto, and it ran 12.84@104 with gutted cat,magnaflow,2800 stall

 

It sounds like you scored a factory freak, and are a good driver. Very impressive bolt-on times, imagine a cam .