man im stuck! ive got everything, un bolted, but i cant get it to slide out. does it come out the bottom or top, ive tried both, ive got the altenator, starter off, i thoght about taking un bolting the motor mount but cant get to it.....................help

the car is a 94 lt1 m6 with jet hot long tubes.

 

well the way it goes in is to unbolt the motor mount and jack up the motor.. so i say try harder to get to it or get the right tools if you dont have them.. and yes it comes out the top
good luck!

 

do i unbolt the motor mount itself or the mount from the body or the mount from the motor?

 

You should be able to just pull the 6" bolt and jack it up a couple inches to clear, just the bolt not the mount on either side.

 

if you jack the car up high enough it should come out through the bottom, I've never had to jack the motor out to get LT's in.

 

yeah me either...i got both of my headers in in less than 15 min...(thats prolly cuz there were no heads on the engine..lol... jacking up the motor is easy...just unbolt..jack(with apiece of wood so you dont dent the pan)

 

Got them in without unbolting any mount, bustin a few knuckles. Have FUN!!!!