Heads & Cam installed
Heads & Cam installed I just got my ported and polished heads & intake installed along with a 58mm TB. I went for the 2.02 on the intake 1.60 on the exhaust. Also went with the beehive springs and 1.6 rockers. I'll post the flow numbers soon. I ended up getting a crane 210/224 112 lsa cam. I dont think I've seen anyone running that cam on here before. Its got a great sound and excellent driveability. I haven't got a chance to really push the car since the weather has been poor out here but i did feel a difference just in normal driving since the throttle response is quicker. I still need to get a dyno tune which will be like in a month from now and im sure it will unlock a significant number of horses. I'll give you guys a heads up after i take it to the track.
Some guys on CamaroZ28.com run that cam and like it as well as a bunch of b-body guys. Most people on the Camaro boards will not bother with a cam that "small" despite the reality of how well it works.
yeah when i saw the numbers i was like DAMN this cam is tiny, but it was recommended by some people who really know their stuff. now that its in the car it doesnt feel small at all. if this is a small cam then the gm847 or cc306 must be horrible to drive on a daily basis. but i saw on a post that u (96capricemgr) had that said crane cams are smaller but work close to as well as cams with bigger numbers. whatever it is i can tell i'll be very happy with it.
