Header Help, 911!!!!!!!!!!!
Thread Starter
On The Tree
Joined: Oct 2005
Posts: 174
Likes: 0
From: Yakima, WA
Header Help, 911!!!!!!!!!!! I have a 95 Z and am installing pacesetter lt's. I have the drivers side in but the passenger side is not able to lign up because the high pressure a/c line is in the way. Has anyone had this happen??? We dont want to bend it and crimp off the A/c, what do I do??????? Thanks for the help guys
Fire Fighter calling 911....lol
Move the AC line. Sometimes you have to bend stuff, it will move with a little love...
I have no AC, so I guess I won't have that problem, eventhough I can't think of what line would be in the way..
Move the AC line. Sometimes you have to bend stuff, it will move with a little love...
I have no AC, so I guess I won't have that problem, eventhough I can't think of what line would be in the way..
thats weird that you are having clearance problems with the AC lines, on my TA they are nowhere near enough to touch the header, the power steering line gave me some problems on the bolt install but got the bolt and the locking flange or washer on, hmm maybe some pics would help us help you
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
you need to unbolt the ac and that will allow yuo to move the line enuff to got by it i just got mine installed and merv found the brake problem it was the pass. side wheel hub abs sensor had to replace the entre hub assemble 
Them things are bitchy, I don't have that problem to worry about. I unplugged mine, removed the wires, and programmed the front ABS out. I got the LS1 Big Brakes, the thing stops like twice as fast, no joke. They are some damn good brakes.
I have to change both of them front Hubs when I get back. The left side bearing is shot, and might as well do both cause it's over the 100K mile mark.
I have to change both of them front Hubs when I get back. The left side bearing is shot, and might as well do both cause it's over the 100K mile mark.
