Gauge pics wanted
Gauge pics wanted I need some creative ways to mount some 2 1/16" gauges, show me some pics of your gauges mounted in the dash, console, cupholder, anything! thanks!
not mine but here's a couple http://www.extreme-z.com/appearance/...nterior/gauges http://www.extreme-z.com/appearance/...small_DSC_6812
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Gifts Neither Your Dad Nor Grad Will Shove Into the 'Trinket Drawer'
Brett Foote
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Props bro, that looks really nice, always loved the TAs vent gauge option
As far as the speedo is concerned yeah i don't need it. Timeslip will tell me how fast i'm going and on the street i'll just go as fast as everyone else...
I like Taubr Unit's setup. Does that cubby hole in front of the shifter just come off, or did you not have one, or you have to cut it off?? I'm going to have 3 sportcomp 2 1/16 gauges and I thought I would mount them in the hole, but yours is way cleaner looking.
Originally Posted by n2ocamaro
Here is mine. The A-pillar has nitrous and fuel pressure. The radio slot has oil pressure and trans-temp. I will be adding a wideband AFR gauge under the nitrous switches.
yea, on mine the "box thing" is attached to the bottom as a whole. Its plastic welded to the bottom of the bottom part. I just took a lighter underneth it and it popped right off, and stayed clean and not ghetto looking. Then just mounted the gauges to the councel. I like it cause its out of the way and you dont have the "rice burner" look with gauges all over the place.