ShadyPhi

iTrader: (9)

where are the fuel lines? Thats the big black line that goes over the driver side strut tower

Heck, where is the PCM at? Thats amazing if he hid all that stuff

zlover129

iTrader: (10)

Fuel lines are routed behind the brake booster, the Computer was relocated to behind where the heater/ac controls are usually, under the dash

rob97ss

iTrader: (1)

Thats just amazing!!!!

97blkz

iTrader: (1)

Very clean but I like to race to much to have it that clean!

zlover129

iTrader: (10)

It is hard to keep it clean, but it is doable and he does. Rhis isnt a trailer queen, it can be daily driven, just a lot of effort has been put into it, it was going to be driven down to Atlanta for G10 but it had a bad electric water pump so that kept it from making it down there. These pics were taken while the car was still on the lift and the owner cleaning the bottom. Hopefully we will get some track times in the near future.

zlover129

iTrader: (10)

All work was done at F-Body Motorsports, we will have a page dedicated to this car in the near future. In the mean time you can visit our site at fbodymotorsports.com and see all of our project cars, just go to the photo gallery tab and you can check them out there.

brynnda

iTrader: (5)

my god is can be done!! that inspries me.

hotrod_bljak

iTrader: (3)

That's one clean engine bay. I am so shocked that I want to do mine now. Again nice.

SRZ

iTrader: (14)

Damn and I thought mine was clean. I need to get it painted it like that one day but that's still a few yrs off. Very nice job indeed.

titter

iTrader: (5)

wow ... did he also relocate the battery to the trunk? very clean indeed.

jldak318

iTrader: (3)

madman sells an alternator relocation bracket. moves the alternator where the a/c goes. makes for a cleaner looking engine bay.

nice car btw.

borninatransam

iTrader: (4)

all that work with stock valve covers? come on now get some nice chrome ones or some powder coated black ones with bow ties at least. but that **** is clean, i think i just found my project for the rest of the summer.

zlover129

iTrader: (10)

I somewhat prefer the look of the powdercoated stockers vs some aftermarket versions, never been a fan of them, too gaudy to me

thesoundandthefury

iTrader: (3)

That guy's gonna win some trophies for sure. Popping the hood and seeing nothing but a motor is the only way to go. Awesome job.

asudecat

iTrader: (11)

take a look at my engine bay. Page 4. There are 2 pics there but not up close. I get it back from paint tomorrow. So I will get more pics out soon.
We actually went all the way and welded up some plates over the hole where the fuel lines came in. Also welded up the lines as you can see. we will also be hiding the wires as much as possible


http://www.cardomain.com/ride/2159975/4

zlover129

iTrader: (10)

Going to be another great LT1, on several of our cars we have decided to re-route the fuel lines, mine personally will have it welded up, well it is welded up just needs some body filler in the plate and some paint. He put the plate since really he forgot to weld it in before he had it painted so now he couldn't. LT1's are my favorite motors as far as looks go. A lot of work put into this car, thanks for all the compliments.

mumu_624

iTrader: (1)

heres a pic my bro took..its kinda fusy because its a pic from a phone

http://pictures.sprintpcs.com/mmps/R...,255,1,0,0,0,0

asudecat

iTrader: (11)

Took a couple more pics this morning. The car will be done later on today.
Just another close up on the engine bay.
http://www.cardomain.com/ride/2159975/5