Hotcam Kit install
#1
Teching In
Thread Starter
Join Date: Oct 2002
Location: Bergen County, NJ
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Hotcam Kit install
I am purchasing the LT4 Hotcam Kit for my 96 Formula WS6. Me and a friend who has a lot of engine building experience with Mustangs, are going to do the install.
I was wondering if anyone has a writeup on this install, or if anyone knows where i can find step by step instructions on the LT4 hotcam kit install. I'm trying to avoid having to pay for the installation becaus I know its costly.
I've helped on many rebuilds on friends' engines but none are LT1's. So I wanted to be safe and follow instructions.
Thanks
<small>[ October 22, 2002, 03:24 PM: Message edited by: 1QuickWS6 ]</small>
I was wondering if anyone has a writeup on this install, or if anyone knows where i can find step by step instructions on the LT4 hotcam kit install. I'm trying to avoid having to pay for the installation becaus I know its costly.
I've helped on many rebuilds on friends' engines but none are LT1's. So I wanted to be safe and follow instructions.
Thanks
<small>[ October 22, 2002, 03:24 PM: Message edited by: 1QuickWS6 ]</small>
#2
Launching!
iTrader: (1)
Join Date: Aug 2002
Location: Tulsa, OK
Posts: 246
Likes: 0
Received 0 Likes
on
0 Posts
Re: Hotcam Kit install
Just grap one of those $20 Haynes manual.
They have a pretty detailed section in it.
I'm don't know any places off the top of my head of a site that has that detail information.
You might try www.projecttransam.com site.
They have a pretty detailed section in it.
I'm don't know any places off the top of my head of a site that has that detail information.
You might try www.projecttransam.com site.