LT1-LT4 Modifications 1993-97 Gen II Small Block V8

Plugs and wires

Thread Tools
 
Search this Thread
 
Old Mar 14, 2003 | 11:01 AM
  #1  
TXZ28's Avatar
Thread Starter
Teching In
20 Year Member
 
Joined: Mar 2003
Posts: 22
Likes: 0
From: Spring, TX
Default Plugs and wires

I am new to Fbody. I recently purchased a 94Z28 and it has a miss at idle when warmed up. I am going to replace the plugs and wires(TR55,Taylor) to start with. I would appreciate your help with this problem. The other fbody sites don't seem to want to lend a helping hand so I'm trying this site. Also, when changing wires should I upgrade the coil(MSD).
Reply
Old Mar 14, 2003 | 11:25 AM
  #2  
mighty mex's Avatar
TECH Apprentice
iTrader: (3)
 
Joined: Dec 2002
Posts: 391
Likes: 0
From: Houston, TX
Default Re: Plugs and wires

I would only do the coil if you are going ot install an ignition box. other than that, you should be ok with a minor tune up. you dont plugs and wires on an LT1 before???? If not, good luck, they are a pain in the A$$ man. Email me if you want mightymex69@yahoo.com
I do side jobs all the time, check your pm.
Reply
Old Mar 15, 2003 | 02:01 AM
  #3  
Gangly's Avatar
TECH Resident
 
Joined: Jun 2002
Posts: 943
Likes: 2
From: Houston
Default Re: Plugs and wires

same here, im in spring texas and have TONS of experiance with burnt plug wires, lol. let us know if you need some help.
Reply




All times are GMT -5. The time now is 03:41 PM.