a/c delete pulley
a/c delete pulley anyone have any problem with it lining up? i had to shim mine out 1/4"!!! it shredded my belt before i noticed,of course 
it's real fun to take my 12rib s/c belt off to get to it 
it's real fun to take my 12rib s/c belt off to get to it 
11 Second Club
Joined: Jul 2007
Posts: 94
Likes: 0
From: Hoagland, IN
I had the same problem with the A/C delete pulley from Advance Auto. It's a piece (of ****) from China. Had to add washers on the back side of the bracket so it would align with the other pulleys.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
I had to drill out the threaded holes and space it out roughly 1/4" on the **** pulley I bought. Sinnce then I deleted the power steering so, I'm just running the alternator now not other pullies.
On The Tree
Joined: Feb 2007
Posts: 158
Likes: 0
That might be why I got mine for only 39 bucks also. I am doing a LT1 into my 85 Firebird, and I deleted the ac since there is to much work to get all that stuff in there. I hope the 2 washers for each bolt I put in is enough to get everything lined up and not shred any belts too.
I used 3 washers on each hole. How many you need will depend on the thickness of your washers. Install it and use a straight edge to see if it lines up with your other pullies. Theres no need for trial and error, it's easy to get it right the first time.
That must be a pretty short belt you're running! I'd like to do that but I'm sure it'll be a bitch turning with 275/40's on the front lol!
I don't recall the length of the belt off the top of my head but it's pretty short. I'd imagine it would be pretty tough with 275's With skinnies it's easy. I havn't put my 275's on because I don't wanna put that much effort into turning the pos.
11 Second Club
Joined: Jul 2007
Posts: 94
Likes: 0
From: Hoagland, IN
I also got the one from summit. I also had to drill the threads out and add washers to the back of it to align with the rest of the pulleys. WTF? But I havent ran it yet. still in progress.
