LT1-LT4 Modifications 1993-97 Gen II Small Block V8

my lt1 has issues

Thread Tools
 
Search this Thread
 
Old Jan 18, 2007 | 06:41 PM
  #1  
transambandit's Avatar
Thread Starter
TECH Fanatic
iTrader: (6)
 
Joined: May 2004
Posts: 1,892
Likes: 0
Default my lt1 has issues

drove my t/a for the first time in months and I had the low coolant lite on and I checked the level which was fIne so I dont know whatthe problem is does it need a flush? also im getting misfires like crazy my a/c and heater wont turn on. so far ive installed pacesetter lts otvc spark wires and put an ls1 lid on it. what should I be looking at to fix the problems?
Reply
Old Jan 18, 2007 | 10:57 PM
  #2  
travie319's Avatar
TECH Fanatic
iTrader: (1)
 
Joined: Jun 2005
Posts: 1,071
Likes: 0
From: East of LA
Default

check your wires and see if any are burned.....
pour some water in the dark...and watch for sparks and currents
Reply
Old Jan 18, 2007 | 11:01 PM
  #3  
infinitebird's Avatar
TECH Veteran
20 Year Member
Liked
iTrader: (11)
 
Joined: Jul 2004
Posts: 4,280
Likes: 51
From: Denver, CO
Default

the low coolant light is extremely problematic, if your coolant level is really fine then just ignore it.
Reply
Old Jan 18, 2007 | 11:04 PM
  #4  
transam5.7lt1's Avatar
TECH Addict
20 Year Member
Liked
Loved
Community Favorite
iTrader: (18)
 
Joined: Jul 2005
Posts: 2,686
Likes: 11
From: Texas
Default

You have a bad coolant level sensor, it located in the radiator, passenger side.
Reply
Old Jan 19, 2007 | 12:12 PM
  #5  
transambandit's Avatar
Thread Starter
TECH Fanatic
iTrader: (6)
 
Joined: May 2004
Posts: 1,892
Likes: 0
Default

okay what about the misfires? i have the OTVC wires and none of them are where they can get burned, do you think i would get misfires if i had one or 2 of the plugs in the wrong position?
Reply
Old Jan 19, 2007 | 02:30 PM
  #6  
ricknbird350's Avatar
TECH Regular
iTrader: (21)
 
Joined: Mar 2005
Posts: 435
Likes: 0
From: butler, pa
Default

Originally Posted by transambandit
okay what about the misfires? i have the OTVC wires and none of them are where they can get burned, do you think i would get misfires if i had one or 2 of the plugs in the wrong position?

if you have a plug wire on the # 2 spark plug and on the # 4 on the opti it will act just like a miss, because its sending spark to the #2 and #4 at the wrong time. double check your wires
Reply
Old Jan 19, 2007 | 11:26 PM
  #7  
transambandit's Avatar
Thread Starter
TECH Fanatic
iTrader: (6)
 
Joined: May 2004
Posts: 1,892
Likes: 0
Default

okay now im having a major problem with hesitation, ill be driving along and everythign will die for a split second and the car will almost shut off then everything will come back on, im thinking its eithor my alternator going or my opti, also my temp gauge doesnt appear to be working, it just sits all the way at 160 any ideas whats up with that.
Reply
Old Jan 20, 2007 | 12:38 AM
  #8  
FANTA-Z's Avatar
On The Tree
iTrader: (16)
 
Joined: Jan 2007
Posts: 179
Likes: 0
Default

Do you have an SES light? What are the codes that its reading if you do? Have you looked under the hood at night in a dark place? If not do this and see if you notice any spark flying. Your temp issue could be the sensor. Check it out and make sure the wire isnt burnt to it. Its located on the driverside head by the number 1 plug.
Reply
Old Jan 20, 2007 | 12:51 AM
  #9  
transambandit's Avatar
Thread Starter
TECH Fanatic
iTrader: (6)
 
Joined: May 2004
Posts: 1,892
Likes: 0
Default

i am also wondering if it might be the fuel pump, on my way home tonight it only sputtered once, and i filled up my tank 1/2 way and it didnt sputter at all after that. It might have been bogged down after sitting in my driveway for so long.

oh no i dont have any SES lights, im gonna run a check tomorrow and see if i can find any codes.
Reply




All times are GMT -5. The time now is 12:40 AM.