wiring help
01-27-2007, 08:33 PM
#1
Teching In
Thread Starter
Join Date: Oct 2004
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
wiring help i just recently had my motor out and sent to the shop i had her beefed up a little bit a nice port job and a bore and stroke job its now a nice little 396 with ported lt4 heads and intake well anyways
some where in the process a wire was broke its a black wire that comes from the area that the o2 sensor and the knock sensor comes from on the passenger side there is the bigger gauged wire that goes to the startor and and a slightly smaller guage wire that also goes to the startor all the wires are hooked to the o2 and the knock sensor only has one wire like it did before but i cant seem to find out where this other wire goes please help
is there suposed to be 2 wires that go to the negative side of the startor
some where in the process a wire was broke its a black wire that comes from the area that the o2 sensor and the knock sensor comes from on the passenger side there is the bigger gauged wire that goes to the startor and and a slightly smaller guage wire that also goes to the startor all the wires are hooked to the o2 and the knock sensor only has one wire like it did before but i cant seem to find out where this other wire goes please help
is there suposed to be 2 wires that go to the negative side of the startor
Last edited by VortecCamaro; 01-28-2007 at 02:04 PM.
