HP estimates
Thread Starter
Teching In
Joined: May 2006
Posts: 15
Likes: 0
HP estimates just wondering if anyone could give me a ballpark figure of what kind of numbers i should be making with my mods
trickflow heads, milled for ~10.8:1 compression
port matched intake manifold
speed inc custom cam .560 lift 224/230 duration 112.5 lsa
trickflow 1.5/1.6 roller rockers
30# injectors
pacesetter longtubes and ory
hooker catback
slp cold air intake
throttle body air foil
aeromotive underdrive pullies
remover AIR and EGR
i think thats it....
and im having speed inc dyno tune it when im finished
do you think its possible to see near 400RWHP?? my goal is 400 and i would like to reach it. also what do you think i could run in the 1/4 with these mods?? my car has lower control arms, panhard rod, subframe connectors, torque arm, tunnel brace w/ driveshaft loop, strut tower brace, and probabally ill get some drag radials by summer.
thanks
trickflow heads, milled for ~10.8:1 compression
port matched intake manifold
speed inc custom cam .560 lift 224/230 duration 112.5 lsa
trickflow 1.5/1.6 roller rockers
30# injectors
pacesetter longtubes and ory
hooker catback
slp cold air intake
throttle body air foil
aeromotive underdrive pullies
remover AIR and EGR
i think thats it....
and im having speed inc dyno tune it when im finished
do you think its possible to see near 400RWHP?? my goal is 400 and i would like to reach it. also what do you think i could run in the 1/4 with these mods?? my car has lower control arms, panhard rod, subframe connectors, torque arm, tunnel brace w/ driveshaft loop, strut tower brace, and probabally ill get some drag radials by summer.
thanks
