New Cam Help Please!!!!

Reply Subscribe

Thread Tools

Search this Thread

Mar 6, 2007 | 03:25 PM

SJblackLT-1

Thread Starter

Teching In

Joined: Aug 2006

Posts: 33

Likes: 0

From: SAN JOSE, CA

New Cam Help Please!!!!

Waz Up Guys Havent Been In Here 4 Days. Have Couple Questions Hopefully Some1 Can Help. Im Not Vary Knowlagable With Cams An I Was Wondering If This Cam Will Wrk Alrite With My Car. Have Stock 350 With Long Tube Headers. The Cam Size Is 225/234 113ls .505/.530 With 1.5's And .560/.580 With 1.65's. I Wana Go With Some 1.6 Rockers Though Jst Dnt Have The Numbers For That. My Other Question If It Will Hang With Lil 100 Shot Of Noz??? Thank 4 Da Help Really Appreciate It!!!!

Mar 6, 2007 | 03:29 PM

Hark_Z

TECH Resident

iTrader: (12)

Joined: Sep 2005

Posts: 786

Likes: 0

From: St Louis, MO

do the NAWZZ MAynee

Mar 6, 2007 | 03:39 PM

LiENUS

TECH Apprentice

Joined: Mar 2006

Posts: 326

Likes: 0

Quote:

Originally Posted by SJblackLT-1

Your numbers dont match up for the 1.5s vs 1.65s, assuming the 1.5 numbers are correct with 1.6 rockers youl'l have .539/.565 with 1.65s it should be .555/.583 (assuming the 1.5 numbers are the correct ones)

Mar 6, 2007 | 03:49 PM

SJblackLT-1

Thread Starter

Teching In

Joined: Aug 2006

Posts: 33

Likes: 0

From: SAN JOSE, CA

Yea I Might Of Put Da 1.65 Wrong The Numbers Are Lil Blurry But Da 1.5 Are Rite. You Think My Heads/bottom End Would Be Fine With 1.6's??????

Mar 6, 2007 | 04:10 PM

LiENUS

TECH Apprentice

Joined: Mar 2006

Posts: 326

Likes: 0

Quote:

Originally Posted by SJblackLT-1

Yea I Might Of Put Da 1.65 Wrong The Numbers Are Lil Blurry But Da 1.5 Are Rite. You Think My Heads/bottom End Would Be Fine With 1.6's??????

Stock heads dont flow much above .500 so with that cam you'd probably be better off with the 1.5s, and you'd need new springs too. The only thing the 1.6s will do is give you a more aggressive ramp rate which MIGHT be of benefit but its really hard to say.