How do you do it, cause i know of the two bolts at the bottom of the strut. But are there any others?

 

the 4 at the top?

 

Yup, 2 on the a-arm, 4 on strut tower(under the hood), might have to use a pry bar to lower the a-arm enough to get it out. The upper control arm mount comes out with the strut so I'm not sure if you have to bust a ball join loose, but it's probably not a bad idea.

 

yea...it's aint easy....i got all the bolts loose. I think ima removed the spindle

 

dont need to remove the spindle just pop the top balljoint loose from it and the control arml'l come out with the strut tower.

 

I have done this on my car and others many times. Never, not once, have I had to pop any ball joints. Remove the top and bottom bolts and it will come out...easily.