goodrich969

iTrader: (9)

Would a big cam 238/242 .600 lift with nice flowing heads around 265cfm with LTs and dumped x pipe take a cammed LS1?

the_merv

iTrader: (88)

How cammed is the LS1, and what size is it?
The LSX that I am building will be Cammed with a 237/242, .603/.609, 112LSA, and the Heads flow 325/210. This is on a 402ci Stroker, so that is kinda out of the picture..

goodrich969

iTrader: (9)

yeah it isnt a 402 thats for sure. I believe its a relativly small cam something along the lines of 21x/22x w/ LTs and catback. I have a 238/242 .600 112 custom grind and these heads flow somewhere around 265/205ish, LTs with x pipe dumped and a cai. With the heads and the cam that i've done, I think I should pull him.

the_merv

iTrader: (88)

Sounds like a stout setup for a 350, that's a big Cam. What do you have in for Gears/Stall..

goodrich969

iTrader: (9)

I have 3.73sand a 3k stall right now. I have a 3800yank waiting to be put in. Yeah, the cam I put into was huge for stock heads but I knew I was going to be doing heads so I figured why not go big sooner rather than later.

the_merv

iTrader: (88)

You should get it..