Help with headers
Thread Starter
Registered User
Joined: Apr 2007
Posts: 29
Likes: 0
From: Naples, Florida
Help with headers Hi, I'm new to the forums.....I own a 1997 Black Camaro SS w/ 24,000mi......I just put Flowmaster 80 series muffler on it but i wanted to know the best headers to throw on it, suggestions would be awesome thanks
you want long tubes, trust me. shortys arent cuttin it for me. everyone seems to like pacesetter. they're relatively cheap and are decent quality. never heard anything bad about them. i agree with plaf 713, get the true duals. nothing sounds better than a set of trual duals on an lt1. 
On The Tree
Joined: Oct 2006
Posts: 116
Likes: 0
From: Northwest burbs of Chicago
Well you want the best go with Kooks. If you can't swing kooks go with Hookers or SLP's . But IDK I just never liked pacesetters don't be offended but my personal opinion is that there garbage. You look at the setup and diameters on them and that's what I read. Look at the hookers. They even design the headers to work around the steering linkage.
With the pacesetters you have to also bend them forcefully to fit up against the floor boards with the y pipe. That's is just insane imo. I've heard so many people tell me they have to bend them a little bit.
IDk I've saved for a little extra longer and I'm going with hookers at the end of this month. Hookers through my borla should sound nice.
With the pacesetters you have to also bend them forcefully to fit up against the floor boards with the y pipe. That's is just insane imo. I've heard so many people tell me they have to bend them a little bit.
IDk I've saved for a little extra longer and I'm going with hookers at the end of this month. Hookers through my borla should sound nice.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo
Originally Posted by 97BlackSS
I think im going with SLP just because they made a good portion of my car.
And what "portions" are you referring too?
If you have an SS all you have on us is the crappy SS Ram Air that has way to many bends and sucks in warm air, followed by a catback thats a little better then stock.
Its basically just a hood and some wheels.
Im pretty sure an SS, and SLP SS are two different cars...
Can someone verify?
Originally Posted by 97BlackSS
..where would i get them coated at? what kind of shop would do this. Thanks guys
Do not get swayed by the SLP name, they are good, but not that good.
I do believe thier headers for Fbody's are stainless but I am not sure.
If they are not, Jet Hot LT's are a much better choice, because they are coated inside and out (unlike Pacesetter) and the Sterling coating is top quality.
If you can afford the big cheese, get Kook's Longtubes. They are TOP of the line headers
Launching!
Joined: Feb 2007
Posts: 262
Likes: 6
From: Nebraska
Kooks! and ^ if u want to go by ratings 96-97 was 285 but we should all know that ratings don't mean anything!! yes, slp took z28's and gave them different wheels, suspension, spoiler, hood, a pathetic 'ram air' and catback, and some emblems. unless the emblems make power in the same fashion that graphics do on ricers, the ss have very little power increase over the z28
Originally Posted by CAMAROZ28SS
also the SS's was alot better then the Z28's in 96 and 97. Z28's were rated 275HP and the SS was 305HP.
Like the LS1, these numbers were highly underrated to make the 300hp vette seem more powerful, but it was a hoax.
Take of the crappy Fbody intake and stock LT1 catback, and they put down the same power.
On The Tree
Joined: Jul 2006
Posts: 177
Likes: 0
From: Keego Harbor, Michigan
Originally Posted by burnzilla
Incorrect.
Like the LS1, these numbers were highly underrated to make the 300hp vette seem more powerful, but it was a hoax.
Take of the crappy Fbody intake and stock LT1 catback, and they put down the same power.
Like the LS1, these numbers were highly underrated to make the 300hp vette seem more powerful, but it was a hoax.
Take of the crappy Fbody intake and stock LT1 catback, and they put down the same power.
get rid of that flowmaster , as for the best headers get qtp with the electric cutouts or kooks , slp but if your car is low then they will scrape cause they hang really low, hooker LT or Jet hot Lt. I just listed the best ones in order for ya but go with what your wallet will allow you to go. Qtp cost like a grand and kooks is up there with qtp and slp is like in the 700 range, hooker lt are cheap for like 500 i believe but sound good when open , pacesetters are cheap but good in quality. on a second note you could go to www.ls1sounds.com and see which one sounds the best to
pacesetter longtubes coated are right behind hooker in price, i think people underestimate pacesetters, ive heard good and bad things about them, but yet ive heard good and bad things about a lot of performance parts, whichever brand you go with make sure they are coated and they are longtubes, end of discussion
