LT1-LT4 Modifications 1993-97 Gen II Small Block V8

Car breaking up..

Thread Tools
 
Search this Thread
 
Old 05-15-2007 | 05:30 PM
  #1  
Gun5's Avatar
Thread Starter
TECH Addict
iTrader: (37)
 
Joined: Feb 2006
Posts: 2,714
Likes: 1
From: Tomball (H-Town), TX
Default Car breaking up..

car breaks up u can hear it at like 4 grand when im holding it there driving... didnt do it before the engine flooded... (MSD 6AL died) so far iv changed oil and just hooked it up stock but havnt hooked the new 6al back wanna get rid of the problem instead of hiding it.... car starts fine.. and still hauls.. what could it be?
Old 05-16-2007 | 08:24 PM
  #2  
Gun5's Avatar
Thread Starter
TECH Addict
iTrader: (37)
 
Joined: Feb 2006
Posts: 2,714
Likes: 1
From: Tomball (H-Town), TX
Default

bumpp
Old 05-20-2007 | 07:07 PM
  #3  
redhot lt-1's Avatar
Launching!
iTrader: (2)
 
Joined: Dec 2005
Posts: 275
Likes: 0
From: sumter,sc
Default

you my want to look into the opti. stock opti`s can`t handle high rpms after it gets high miles on it and stock replacement aren`t any better. i went throught 5 of them.
before before getting a dynatech opti. but look at the opti made by msd it seems to be a great unit.
Old 05-20-2007 | 09:58 PM
  #4  
jakesz28's Avatar
Banned
iTrader: (9)
 
Joined: Oct 2006
Posts: 856
Likes: 0
From: iowa
Default

I have the MSD opti and it made it thru a bad water pump. Came home from the track and jacked the car up to find antifreeze all over the opti. Changed the water pump and no problems .
Old 05-24-2007 | 05:44 PM
  #5  
Gun5's Avatar
Thread Starter
TECH Addict
iTrader: (37)
 
Joined: Feb 2006
Posts: 2,714
Likes: 1
From: Tomball (H-Town), TX
Default

got a MSD pro billet opti
Old 05-25-2007 | 06:24 PM
  #6  
redneck01's Avatar
TECH Apprentice
iTrader: (3)
 
Joined: Jul 2006
Posts: 334
Likes: 0
From: baltimore, md
Default

check the wiring to and from the msd. i had issues with that and it cleared my miss by playing with the wiring. too much heat fubars things in that wiring
Old 05-29-2007 | 05:14 PM
  #7  
Gun5's Avatar
Thread Starter
TECH Addict
iTrader: (37)
 
Joined: Feb 2006
Posts: 2,714
Likes: 1
From: Tomball (H-Town), TX
Default

Originally Posted by redneck01
check the wiring to and from the msd. i had issues with that and it cleared my miss by playing with the wiring. too much heat fubars things in that wiring
MSD opti, MSD Coil, my MSD box?? I got everything msd




All times are GMT -5. The time now is 06:01 PM.