OK, I'll post it here...
09-01-2007 | 10:17 PM
#1
Thread Starter
That's MISTER MODERATOR
iTrader: (9)
Joined: Nov 2005
Posts: 7,589
Likes: 54
From: NYC
OK, I'll post it here... (Posted in Wheel & Tire with no response...)
For my '94 bird, I'm looking to get a set of Weld Racing Draglite wheels, 15 X 10's with 7.5 BS and 15 X 3.5's with 1.75 BS.
What tires and what size should I consider? This set will be strictly for drag racing at the track only.
I'm considering:
Fronts: MT ET Fronts, 25 X 4.5
Rears: MT ET Drag Slicks, 28 X 10.5
For the rear slicks, they are 10.00 inch tread width and 11.70 inch.
They have a "extra tread width" version of their 28 X 15 slick with 10.90 inch tread width and section width of 13.10.
Will these extra width tires fit? On the street, I'm running 315/35/17 BFGDR on 17 X 13 ZR1 wheels and the inside snubbers been removed and the wheel well lips been rolled.
For my '94 bird, I'm looking to get a set of Weld Racing Draglite wheels, 15 X 10's with 7.5 BS and 15 X 3.5's with 1.75 BS.
What tires and what size should I consider? This set will be strictly for drag racing at the track only.
I'm considering:
Fronts: MT ET Fronts, 25 X 4.5
Rears: MT ET Drag Slicks, 28 X 10.5
For the rear slicks, they are 10.00 inch tread width and 11.70 inch.
They have a "extra tread width" version of their 28 X 15 slick with 10.90 inch tread width and section width of 13.10.
Will these extra width tires fit? On the street, I'm running 315/35/17 BFGDR on 17 X 13 ZR1 wheels and the inside snubbers been removed and the wheel well lips been rolled.