LT1-LT4 Modifications 1993-97 Gen II Small Block V8

1.33 60'

Thread Tools
 
Search this Thread
 
Old Jun 1, 2003 | 01:27 AM
  #1  
chevyguy3's Avatar
Thread Starter
TECH Enthusiast
20 Year Member
Photogenic
iTrader: (4)
 
Joined: Dec 2001
Posts: 519
Likes: 2
From: Northern Indiana
Default 1.33 60'

unfortunatly that was about the only good thing that went on tonight. first pass on the new combo with nitrous (just a 75hp shot) car came up on the bumper HARD. ended up smashing 4 of the header primaries, hit the oil pan, tranny pan, and steering rack and popped one of my AFCOS. later made a couple passes lauching at lower RPMs and pulling 2nd gear as soon as it started coming up. managed a 9.98 @ 133 with the 75hp jets. shut the nitrous off just after the 1/8 and went the last few hundred feet on the rev limiter. made a couple NA passes also, did a 10.52 @ 127

hopefully for next weekend the wheelie bars that are on my floor will be on the car, along with a gear change and some bigger jets. got a lot of things to fix too
Reply
Old Jun 1, 2003 | 03:40 AM
  #2  
mike97ss's Avatar
Staging Lane
 
Joined: Nov 2002
Posts: 61
Likes: 0
From: Orange Park "jax" FL
Default Re: 1.33 60'

very nice runs man!
Reply
Old Jun 1, 2003 | 10:12 AM
  #3  
ChrisB's Avatar
TECH Addict
 
Joined: Nov 2001
Posts: 2,207
Likes: 0
From: College Station, Tx
Default Re: 1.33 60'

Congratulations, sounds like you have the power and the suspension there now (maybe a bit too much of the latter!)

Sorry to hear about your broken parts, but at least it was for a worthy cause!


Reply
Old Jun 2, 2003 | 12:11 AM
  #4  
Gangly's Avatar
TECH Resident
 
Joined: Jun 2002
Posts: 943
Likes: 2
From: Houston
Default Re: 1.33 60'

man, if only you had a video of the launch
Reply
Old Jun 2, 2003 | 04:06 AM
  #5  
chevyguy3's Avatar
Thread Starter
TECH Enthusiast
20 Year Member
Photogenic
iTrader: (4)
 
Joined: Dec 2001
Posts: 519
Likes: 2
From: Northern Indiana
Default Re: 1.33 60'

i have videos of 3 straight 1.33 launches im going to try to get converted and posted. no vid of the bumper stand though
Reply




All times are GMT -5. The time now is 09:49 PM.