93 Knock Problem
Thread Starter
Teching In
Joined: Aug 2004
Posts: 46
Likes: 0
From: West Palm Beach Florida
93 Knock Problem Hey Guys,
I'm having an issue with my 93 showing a ridiculous amount of knock. I know it's because of the rockers, headers, ect... but my problem is I can't convert to an LT4 Knock Sensor or Module becuase it's a 93 Computer. I need to calm down the knock reading so I can start tunning... Anyone have this problem and have any suggestions? Thanks very much...
Mike
I'm having an issue with my 93 showing a ridiculous amount of knock. I know it's because of the rockers, headers, ect... but my problem is I can't convert to an LT4 Knock Sensor or Module becuase it's a 93 Computer. I need to calm down the knock reading so I can start tunning... Anyone have this problem and have any suggestions? Thanks very much...
Mike
On The Tree
Joined: May 2005
Posts: 174
Likes: 0
From: Catawissa PA
Tuning wold be best, but this is another option. Buy you have allot of money invested to take a chance on a $3 part blowing up you motor!
http://www.speeddensity.org/showthread.php?t=2073
http://www.speeddensity.org/showthread.php?t=2073
Thread Starter
Teching In
Joined: Aug 2004
Posts: 46
Likes: 0
From: West Palm Beach Florida
The knock count is moving up and it was retarding timing. I dropped the degree of retard so I could at least get it to run straight for a while. However, I need the KS to record true knock so that I can adjust the timing accordingly. I have no idea if I'm too advanced or too retarded right now. Also is there a specific way to figure out whether the KS is a 3900 ohm or 100K ohm? Thanks again..
Mike
Mike
TECH Senior Member
iTrader: (3)
Joined: Oct 2006
Posts: 7,564
Likes: 4
From: Decatur, TN (N-W of Athens)
You could always give this a try. It's just a simple hardware mod, so you won't do any tunning (spending money) or not running a knock sensor (possible catastrophic event).
http://www.speeddensity.org/showthread.php?t=2073
http://www.speeddensity.org/showthread.php?t=2073
