LT1-LT4 Modifications 1993-97 Gen II Small Block V8

Wiring question

Thread Tools
 
Search this Thread
 
Old Nov 4, 2007 | 08:30 PM
  #1  
Red96TA's Avatar
Thread Starter
12 Second Club
iTrader: (14)
 
Joined: Aug 2006
Posts: 494
Likes: 1
From: Bryant/Fayetteville, Arkansas
Default Wiring question

I know this is kind of out there but its worth a try. Theres a bundle of wires that goes down by the headers on the passenger side. I believe there are 5wires in this bundle. One goes to the 02 sensor and its kind of grayish. One goes to the starter (its a big purple one). Two look like grounds and they are black and have connectors that go over a bolt like most ground wires so Im guessing thats what they are. There is a bluish-teal colored wire that had no connector on it, it was just cut, and I have no idea what it goes to. Any ideas? Or any way to find out what it is?
Reply
Old Nov 4, 2007 | 09:37 PM
  #2  
SnakeOiler's Avatar
TECH Addict
20 Year Member
Photogenic
iTrader: (6)
 
Joined: Aug 2004
Posts: 2,317
Likes: 0
From: FXBG, VA
Default

I believe that would be the knock sensor. The black one is the PCM ground
Reply
Old Nov 5, 2007 | 09:53 AM
  #3  
Red96TA's Avatar
Thread Starter
12 Second Club
iTrader: (14)
 
Joined: Aug 2006
Posts: 494
Likes: 1
From: Bryant/Fayetteville, Arkansas
Default

That would make sense seeing as how I couldnt find the wire to plug up to the knock sensor. Thanks! There are two black wires though...?
Reply




All times are GMT -5. The time now is 12:33 AM.