What Do You Think?
How do you have a 383 LT4 if your sig says Trickflow heads?
Since you are asking this question I will go out on a limb and say you lack the kowledge to build a 383 that needs any more than 27lbs injector. A well done stroker will usually need a little bigger though. THE one way to know for sure is to do a datalog and look at injector duty cycle long as you know the AFR is right.
Since you are asking this question I will go out on a limb and say you lack the kowledge to build a 383 that needs any more than 27lbs injector. A well done stroker will usually need a little bigger though. THE one way to know for sure is to do a datalog and look at injector duty cycle long as you know the AFR is right.
Thread Starter
Staging Lane
Joined: Oct 2005
Posts: 88
Likes: 0
From: ATLANTA,GA
i didn't build this motor my engine builder built it i meant to put lt1. I thought 27's were pretty low I was wanting know what other people thought. this motor is build with best money can buy seen every thing on a parts bin before it was built.i was thinking more around 32's.
