need some help from the best
Thread Starter
Launching!
Joined: Dec 2007
Posts: 208
Likes: 0
From: DeLaWaRe
need some help from the best Ok lets start off first by saying i have a 95 lt1 with a 4l60e car with a lt4 hotcam and someother little mods.... i was looking to get a bigger stall, i have the stock one still in.... i need to know is a tci 3600 just as good as the yank 3600ss can anyone that had or as one of these tell me some pros and cons of both i know the yank runs alittle higher in price but is it wroth it....
Yank and vig are both a better stall. The TCI is a cheaper stall that will seem a little looser on the street and dyno. If the TCI one fits your budget give it a try. I had a low end stall in my car for about 3-4 years without any problems.
Thread Starter
Launching!
Joined: Dec 2007
Posts: 208
Likes: 0
From: DeLaWaRe
If you can spend the little extra, buy a new Vig. or Yank. Had both, and l think both are top notch. Went with the Yank SS3600 lately and it's great. Buy new, so that you aren't one of the unlucky ones that buys a used converter out of a trashed trans. Then you won't have to worry about debris floating around in your trans.
