new motor dyno cc503
#1
new motor dyno cc503
ok here is the rundown its got cc503, 1.6 SA comp pro mags, swirl polish valves 1.94,1.5,p&p heads flow around 265-270, ported intake, ram air , and new bottom end. the numbers seem kinda low but it is untuned and it does not have the longtubes on yet just stock manifolds. but the graph looks really crappy above 4k ( any ideas why)? ohh and it is a M6 car
any thoughts on the graph, the #s, and when get my headers and tune on what it will do? as you can see it only did 299.18HP & 311.17 TQ
any thoughts on the graph, the #s, and when get my headers and tune on what it will do? as you can see it only did 299.18HP & 311.17 TQ
#6
ohh i forgot to mention my rockers were only set to priliminary, so what happend was after the pull one of my rockers slipped off and some of the others were not tight enough, but they are fixed now i set them while running
Trending Topics
#9
12 Second Club
iTrader: (34)
Join Date: Dec 2006
Location: READING Pa
Posts: 712
Likes: 0
Received 0 Likes
on
0 Posts
there is something def wrong my car with the cc503 match ported heads and intake full bolt ons stock bottom end and valves with arizona mid headers with bad exhaust leaks at the head made 358rwhp and 363rwtq...tuned by pcmforless
#10
no other ideas what my prob. might be beacause cam only i should be higher that that, the only thing that are noticably wrong with the car is the vacuum solenoid for the fuel line return hose (the hose is broken) other that that nothing else will that cause any prob. im thinking maybe i need a lt4 knock module.