Missing and rich after cam swap
Thread Starter
Teching In
Joined: Apr 2008
Posts: 47
Likes: 0
From: Reno, NV
Missing and rich after cam swap I just got my 96 Formula back together after installing a CC503 cam, lifters, 1.6 Roller rockers, Crane 10308-1 springs, etc.
I went to start it and she fired right up. It was running rough and threw a DTC right away. The DTC was 0300. I kept it running at 2000 RPM for a few minutes and it started smoking. Gas was dripping out of the exhaust when I shut it off.
Right now I don't know what's wrong. I've got a valve cover off and I'm checking the rocker arm adjustment.
Here's a pic of the #1 plug.
I went to start it and she fired right up. It was running rough and threw a DTC right away. The DTC was 0300. I kept it running at 2000 RPM for a few minutes and it started smoking. Gas was dripping out of the exhaust when I shut it off.
Right now I don't know what's wrong. I've got a valve cover off and I'm checking the rocker arm adjustment.
Here's a pic of the #1 plug.
Thread Starter
Teching In
Joined: Apr 2008
Posts: 47
Likes: 0
From: Reno, NV
It seems that I've got some sticking injectors. Everything else checks out and it runs great when the RPMs get past 3000. The injectors were sitting on the bench for over a month while I worked on the car. Has anyone else had this problem? The injectors were fine before.
