FS: Blower Cam
Banned
Joined: Feb 2008
Posts: 325
Likes: 0
From: I moved to over there
TOO expensive for used IMO (I know he says new 0 miles but you aren't original buyer so used to seller)
You can have a custom cam ground for ~$130 shipped from Delta cam. They will take an LT1 cam and grind what you want on it (for grinds they have program for). In my charged LT1 I had one ground and I did not use 110 LSA as mentioned most are in the 112 - 114 with almost all choosing 112 straight up.
I think that might be better suited for NA. What charger and boost level will you be running?
This is no joke and no bump.
It was never used BUT new buyer is NOT original owner--cruel but fact. Therefore, it is considereded used, and used <= 50% of original cost. If more buy from dealer. That is life
Also I agree put it in FS
good luck
You can have a custom cam ground for ~$130 shipped from Delta cam. They will take an LT1 cam and grind what you want on it (for grinds they have program for). In my charged LT1 I had one ground and I did not use 110 LSA as mentioned most are in the 112 - 114 with almost all choosing 112 straight up.
I think that might be better suited for NA. What charger and boost level will you be running?
Hah you have jokes my friend this is damn cheap considering it is INDEED a new cam. This has not even been installed therefore it still is new... Not some used stock LT1 cam sent for a regrind.
For any of you who know who Bret Bauer is, he is the one who made this cam for me.
This was made for a 355/Procharged and 15#'s of boost.
For any of you who know who Bret Bauer is, he is the one who made this cam for me.
This was made for a 355/Procharged and 15#'s of boost.
It was never used BUT new buyer is NOT original owner--cruel but fact. Therefore, it is considereded used, and used <= 50% of original cost. If more buy from dealer. That is life
Also I agree put it in FS
good luck
Last edited by BattleShip; May 22, 2008 at 06:21 PM.
Hah you have jokes my friend this is damn cheap considering it is INDEED a new cam. This has not even been installed therefore it still is new... Not some used stock LT1 cam sent for a regrind.
For any of you who know who Bret Bauer is, he is the one who made this cam for me.
This was made for a 355/Procharged and 15#'s of boost.
Hah you have jokes my friend this is damn cheap considering it is INDEED a new cam. This has not even been installed therefore it still is new... Not some used stock LT1 cam sent for a regrind.
For any of you who know who Bret Bauer is, he is the one who made this cam for me.
This was made for a 355/Procharged and 15#'s of boost.
For any of you who know who Bret Bauer is, he is the one who made this cam for me.
This was made for a 355/Procharged and 15#'s of boost.
