clutch switch/safety switch question
Thread Starter
TECH Apprentice
iTrader: (3)
Joined: Jul 2008
Posts: 374
Likes: 0
From: Morinville, Alberta, Canada
clutch switch/safety switch question Is there a way to bypass the clutch switch all together. Mine decided to just crap out and now it wont let the car start. Im just looking for a temp fix so i can drive it for now until i get the parts for it. thanks
Thread Starter
TECH Apprentice
iTrader: (3)
Joined: Jul 2008
Posts: 374
Likes: 0
From: Morinville, Alberta, Canada
Nevermind, i pulled the knee panel down and just stuck a piece of solid core wire in the connector end for a cheap fix until tuesday when the dealer is open. All is good, she fires up nicely now.
P.S There's no harm with that connection being jumped all the time is there? Seeing as how everytime the clutch is pushed down theres a connection made, it shouldnt hurt anything? Thanks
P.S There's no harm with that connection being jumped all the time is there? Seeing as how everytime the clutch is pushed down theres a connection made, it shouldnt hurt anything? Thanks
Basically you can start it in Gear now..
I'm trying to figure out how to wire mine in..I had to bypass the N/S Switch in the Auto when I wired in the LS Engine/Tranny, since then I can start it in any gear..
I'm trying to figure out how to wire mine in..I had to bypass the N/S Switch in the Auto when I wired in the LS Engine/Tranny, since then I can start it in any gear..
Thread Starter
TECH Apprentice
iTrader: (3)
Joined: Jul 2008
Posts: 374
Likes: 0
From: Morinville, Alberta, Canada
Yea i figured thats all it was for. Just wanted to make sure, good to know. Its very apparent now how easy it would be to wire in a killswitch now haha. Thanks
