little brother has a problem
Thread Starter
TECH Enthusiast
Joined: Aug 2008
Posts: 576
Likes: 1
From: En Casa del Carajo
little brother has a problem my brother went and bought a 94 trans am stock for 3000k. it has a pretty bad oil leak or leaks where are the most common areas to check for oil leaks? I truthfully can't figure out where they're coming from.I was told to clean the engine and drive slowly to see if when the car has a load on the motor if we could spot the leak, but it didn't work.I was also told to look for a clean spot where the oil mightbe leaking from? hopefully we won't get hit that hard by hurricane ike. so I can try to fix it soon.
Back of the intake - Feel the back of the intake with your hand, get way in there. If its wet to the touch, thats your leak.
Front cover - Would be all over the place, oil pan included. Should be easy to spot it dripping off the front of the engine.
Those are the "more common", check those and post back.
If its not, rear main seal or oil pan itself could be next...
Front cover - Would be all over the place, oil pan included. Should be easy to spot it dripping off the front of the engine.
Those are the "more common", check those and post back.
If its not, rear main seal or oil pan itself could be next...
TECH Senior Member
iTrader: (3)
Joined: Oct 2006
Posts: 7,564
Likes: 4
From: Decatur, TN (N-W of Athens)
Spray down all the oily spots with brake clean (back of the intake excluded since that'd be the only spot it's leaking from if it's oily) and then drive around for a good hour. That should show some signs of oil weeping and let you know more precisely where it's leaking.
Back of the intake is because of the stupid EGR, in case you're wondering. Hot EGR warps the aluminum a little bit.
Back of the intake is because of the stupid EGR, in case you're wondering. Hot EGR warps the aluminum a little bit.
yup, i have a similar oil leak on my LT1, but its not near as bad, mine is my front seal, the previous owner gobbed a **** load of RTV on it to try and stop the leak...dumbass
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo
Thread Starter
TECH Enthusiast
Joined: Aug 2008
Posts: 576
Likes: 1
From: En Casa del Carajo
sorry I took so long to reply. It was my valve covers, I got a telescoping mirror and saw it pouring out of the bottom of the valve covers. I took one off and the entire gasket was fried. gotta do the other side tomorrow. hopefully thats the problem
Make sure when you put the new ones in that it doesn't fall out when you install the Valve Covers. They tend to do that if you aren't gentle when putting on the Valve Cover. Once it's set on the Head then bolt it on.
I am still waiting to hear about the cow... what happened to the cow?
