LT1-LT4 Modifications 1993-97 Gen II Small Block V8

car dies in 3rd

Thread Tools
 
Search this Thread
 
Old Oct 5, 2008 | 08:19 PM
  #1  
trump167's Avatar
Thread Starter
Teching In
 
Joined: Oct 2006
Posts: 15
Likes: 0
Default car dies in 3rd

need some advice... car makes it to the 330 and dies each time i shift to 3rd its almost as if i turn the switch off. i have changed every sensor from map,temp,iat,mass air,icm ect. fuel pressure never drops below 48psi. im lost any help would be greatly appreciated 96 lt1 heads/cam with everything

Last edited by trump167; Oct 5, 2008 at 08:20 PM. Reason: left something out
Reply
Old Oct 5, 2008 | 10:19 PM
  #2  
SoxXpupPeT's Avatar
TECH Junkie
iTrader: (34)
 
Joined: May 2008
Posts: 3,431
Likes: 1
From: Yonkers, NY
Default

maybe your trans is bad ???
Reply
Old Oct 6, 2008 | 08:36 AM
  #3  
trump167's Avatar
Thread Starter
Teching In
 
Joined: Oct 2006
Posts: 15
Likes: 0
Default

its a m6 car. i dont know if the obd1 is for an a4 or not but wouldnt think that would cause it. drove round da block last night and it shut down in 1st this time??? maybe it needs 5gals of diesel and a good lighter
Reply
Old Oct 6, 2008 | 06:53 PM
  #4  
UDNTCME's Avatar
Staging Lane
 
Joined: Oct 2004
Posts: 93
Likes: 0
From: South Boston, VA
Default

For anybody that was baffled as much as us, it was the engine sensors fuse.
Reply
Old Oct 6, 2008 | 07:29 PM
  #5  
trump167's Avatar
Thread Starter
Teching In
 
Joined: Oct 2006
Posts: 15
Likes: 0
Default

expensive lesson no doubt
Reply




All times are GMT -5. The time now is 03:32 PM.