skip shift eliminator HELP!!!
#1
TECH Fanatic
Thread Starter
Join Date: Jan 2003
Location: San Diego/Schertz,Texas
Posts: 1,415
Likes: 0
Received 1 Like
on
1 Post
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Bought a skip shift eliminator and was told it was an easy install. when i look at it it looks like like i have to drop the tranny. am i looking at it wrong? please help
![Icon Confused](https://ls1tech.com/forums/images/smilies2/icon_confused.gif)
#2
TECH Addict
iTrader: (3)
Join Date: Jan 2003
Location: Houston/College Station, TX
Posts: 2,584
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Yes, totally wrong. If I'm not mistaken, it's on the driver side towards the rear of the tranny kinda on the top but still on the side. The white cap on the SSE goes into the skip shift solenoid on the tranny. The rest of it goes onto the wiring harness that used to plug into the tranny.
Ryan
Ryan
#3
TECH Junkie
iTrader: (9)
Join Date: Dec 2001
Location: WA
Posts: 3,326
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Its just like Onyx Z stated - no need to remove trans or anything. Just jack up the car for better access on the driver's side and you should be fine. Here's a link that should help:
http://www.installuniversity.com/ins...r/cags_slp.htm
http://www.installuniversity.com/ins...r/cags_slp.htm