What is the problem?
#1
TECH Veteran
Thread Starter
iTrader: (10)
Join Date: May 2006
Location: Bay Area, CA (Pittsburg)
Posts: 4,240
Likes: 0
Received 2 Likes
on
2 Posts
What is the problem?
For a while now i have been having some shifting issues. When i'm racing i have a hard time getting into 3rd gear and sometimes 4th and the shifter becomes really notchy. But when i'm driving normal it shifts fine. I was thinking i may need a rebuild but i'm not sure. Does this sound like a transmission issue or clutch hydraulics?
#2
TECH Addict
iTrader: (9)
Sounds like a 3/4 fork issue. Probably worn/broken fork pads, but could be the start of the 3/4 fork bending. Clutch/hyd issues tend to show up in all/multiple gears. Something limited to one synchro/slider/fork is usually inside the trans..
Look at it optimistically as a reason to do a full rebuild on it.. ;-)
Look at it optimistically as a reason to do a full rebuild on it.. ;-)
#3
TECH Veteran
Thread Starter
iTrader: (10)
Join Date: May 2006
Location: Bay Area, CA (Pittsburg)
Posts: 4,240
Likes: 0
Received 2 Likes
on
2 Posts
Sounds like a 3/4 fork issue. Probably worn/broken fork pads, but could be the start of the 3/4 fork bending. Clutch/hyd issues tend to show up in all/multiple gears. Something limited to one synchro/slider/fork is usually inside the trans..
Look at it optimistically as a reason to do a full rebuild on it.. ;-)
Look at it optimistically as a reason to do a full rebuild on it.. ;-)
#5
FormerVendor
iTrader: (38)
Join Date: Nov 2008
Location: Pearland, TX
Posts: 2,309
Likes: 0
Received 0 Likes
on
0 Posts
For a while now i have been having some shifting issues. When i'm racing i have a hard time getting into 3rd gear and sometimes 4th and the shifter becomes really notchy. But when i'm driving normal it shifts fine. I was thinking i may need a rebuild but i'm not sure. Does this sound like a transmission issue or clutch hydraulics?
Well, how old is the clutch? Hydraulics? Whose are they? Power levels? Mileage on tranny?
#6
TECH Veteran
Thread Starter
iTrader: (10)
Join Date: May 2006
Location: Bay Area, CA (Pittsburg)
Posts: 4,240
Likes: 0
Received 2 Likes
on
2 Posts
I have a tex oz700 with a gm slave and mc. This is all about 1 year old. The tranny has 130k on it. On motor its a little over 400hp and on the bottle its over 500hp. I don't spray very much tho.