Trans Prob

Reply Subscribe

Thread Tools

Search this Thread

Oct 18, 2009 | 12:42 PM

93ztwentyeight

Thread Starter

Teching In

Joined: Jul 2009

Posts: 9

Likes: 0

Trans Prob

I have a 93 z28 M6, and it is getting harder and harder to get my car in reverse and first. it seems harder when the car is cold. Also the clutch pedal is dead until about halfway down.

I'm wondering if this is syncros, bearings or cylinder. any help would be greatly appreciated . thanks guys

Oct 18, 2009 | 01:04 PM

thesource

Banned

iTrader: (60)

Joined: Mar 2005

Posts: 2,693

Likes: 0

From: Adkins - Tx

Sounds like a clutch hydraulic issue to me.

Oct 18, 2009 | 01:17 PM

93ztwentyeight

Thread Starter

Teching In

Joined: Jul 2009

Posts: 9

Likes: 0

how would i go about fixing this?

Oct 18, 2009 | 07:11 PM

Gen414

FormerVendor

iTrader: (38)

Joined: Nov 2008

Posts: 2,309

Likes: 0

From: Pearland, TX

Quote:

Originally Posted by 93ztwentyeight

how would i go about fixing this?

replace MC first. If fixes problem, great. If not, move to slave cylinder. Should be taken care of by then...

Oct 19, 2009 | 10:57 PM

93ztwentyeight

Thread Starter

Teching In

Joined: Jul 2009

Posts: 9

Likes: 0

im guessing they are expensive

Oct 19, 2009 | 11:33 PM

cody161

TECH Regular

iTrader: (18)

Joined: Feb 2007

Posts: 460

Likes: 0

From: Bowling Green, ky

you might try checking your fluid and bleeding the hydraulics first, this might help some. these cars are known to have bad clutch hydraulics so replacing the master with an upgraded one would be the best bet to solve your issue.

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last