t56 question
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: May 2008
Location: plainview, tx
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
t56 question
i have 1998 ls1 camaro and im needing a t56 for it and there is a guy selling one online. Its a t56 part# 1386-000-011 gm aftermarket t56. will this work on my car? i dont know much about the different t-56's so if anyone could help i would really appreciate dont wanna buy a transmission that wont work for me. Thanks.
#2
TECH Addict
iTrader: (9)
If it's an aftermarket T56, I'd stay away.. The input shaft is too long, it won't mount an LS1 slave, and the shifter will sit forward too much.
http://www.sallee-chevrolet.com/BorgWarner/bwt56.cfm
It was designed as a direct replacement for the 3rdgen F-body T5 5-speed. The gearset was rated at 400lb-ft because of the smaller input shaft/countershaft interface and the wide-ratio gearing.
http://www.sallee-chevrolet.com/BorgWarner/bwt56.cfm
It was designed as a direct replacement for the 3rdgen F-body T5 5-speed. The gearset was rated at 400lb-ft because of the smaller input shaft/countershaft interface and the wide-ratio gearing.