T5 input shaft length?
#1
TECH Fanatic
Thread Starter
iTrader: (4)
Join Date: Jul 2007
Posts: 1,570
Likes: 0
Received 0 Likes
on
0 Posts
T5 input shaft length?
Im swapping a Volvo B230ft and a Firebird T5 into my latest project, a 1976 Volvo 242. I was talking to the guy who makes the bell housing adapters and he requested some information. I don't have my Tranny out yet, and i was wondering if you guys could help me out?
First, does anyone have any pictures of a T5 out of a 1994 V6 car?Or if the other years are the same and you know for sure, specifically the bell housing as we are trying to figure out if the adapters he makes will bolt on.
Second, can someone measure the length of the input shaft from the trans face to the tip, and the tip diameter.
Or does anyone know any differences between the V6 T5's and Mustang 5.0 T5's? He makes adapters for 5.0 T5's but he thinks they're identical to the Firebird/Camaro T5 but wants this information to prove it.
I really appreciate any help!!!!
-Joshua
First, does anyone have any pictures of a T5 out of a 1994 V6 car?Or if the other years are the same and you know for sure, specifically the bell housing as we are trying to figure out if the adapters he makes will bolt on.
Second, can someone measure the length of the input shaft from the trans face to the tip, and the tip diameter.
Or does anyone know any differences between the V6 T5's and Mustang 5.0 T5's? He makes adapters for 5.0 T5's but he thinks they're identical to the Firebird/Camaro T5 but wants this information to prove it.
I really appreciate any help!!!!
-Joshua