3rd gear
Thread Starter
Teching In
Joined: May 2011
Posts: 19
Likes: 0
From: Northwest Ohio
3rd gear I haven't had my m6 long, but when ever I try to run the gears hard, I can't make 3rd gear. I have it where it needs to be it just doesn't want to go in right away. If I give it a few seconds it will go. The car is stock and shifts fine on normal driving. Any feedback is appreciated.
Launching!
Joined: Sep 2007
Posts: 230
Likes: 0
From: Surrey, BC
Stock master cylinder is junk, try the drill mod (search, there is a guide) or just go for the tick master cylinder. I eventually killed my 3rd gear synchro at the track by just trying to stuff it in. Needless to say I went tick master and faceplated gearset.
Typical symptom of the stock master cylinder. You can read more about it here: http://www.tick-performance.com/imag...kshiftfaq.html
..and you can see our upgraded kit here: http://www.tickperformance.com/tick-...or-ls1-f-body/
..and you can see our upgraded kit here: http://www.tickperformance.com/tick-...or-ls1-f-body/
