c5 clutch install question
Thread Starter
Teching In
Joined: Nov 2011
Posts: 18
Likes: 0
From: The Lone Star State
c5 clutch install question Well since im going to install a cam into my c5 ill need to upgrade my clutch. My question is when the time comes to do the cam, can I just pull the motor and do the clutch then or do I have to remove the rearend and torque tube? If i have to remove the rearend and tube im just going to let a local shop do it, just trying to save some money.
Staging Lane
Joined: Jul 2005
Posts: 96
Likes: 0
From: Stanwood, Wa.
You'll have to pull the rearend, trans, and torque tube, and the headers *if they're long tubes). I wouldn't pull the motor as the cam can be done "in-car". My shop charges $500 labor if you buy the clutch from us. www.diamondclutch.com
We are actually having some specials for LS1tech members currently. $389 shipped for the Stage 2 basic. Drives like stock and good for 550rw, or the complete kit includes a new slave cylinder and new billet lightweight flywheel for $709 shipped. Check sig for info.
Whichever way you go, best of luck to you!
We are actually having some specials for LS1tech members currently. $389 shipped for the Stage 2 basic. Drives like stock and good for 550rw, or the complete kit includes a new slave cylinder and new billet lightweight flywheel for $709 shipped. Check sig for info.
Whichever way you go, best of luck to you!
