Clutch recommendations
Thread Starter
Teching In
Joined: Nov 2011
Posts: 15
Likes: 0
Clutch recommendations New to the site here, What clutch would you recommend ?
Im building a 69 Camaro LS1 T56 Looking for 450 Hp out of this motor.Rear tire is a 335-30-18 Rear end has been built,Subframe connectors.
Motor 2 at a later date will be a LS427 looking for 500-550 to the wheels, I don't want to buy 2 clutches, This car will be a street driven that gets abused.. And some track events.
Any thoughts
Thanks Kirk
Im building a 69 Camaro LS1 T56 Looking for 450 Hp out of this motor.Rear tire is a 335-30-18 Rear end has been built,Subframe connectors.
Motor 2 at a later date will be a LS427 looking for 500-550 to the wheels, I don't want to buy 2 clutches, This car will be a street driven that gets abused.. And some track events.
Any thoughts
Thanks Kirk
New to the site here, What clutch would you recommend ?
Im building a 69 Camaro LS1 T56 Looking for 450 Hp out of this motor.Rear tire is a 335-30-18 Rear end has been built,Subframe connectors.
Motor 2 at a later date will be a LS427 looking for 500-550 to the wheels, I don't want to buy 2 clutches, This car will be a street driven that gets abused.. And some track events.
Any thoughts
Thanks Kirk
Im building a 69 Camaro LS1 T56 Looking for 450 Hp out of this motor.Rear tire is a 335-30-18 Rear end has been built,Subframe connectors.
Motor 2 at a later date will be a LS427 looking for 500-550 to the wheels, I don't want to buy 2 clutches, This car will be a street driven that gets abused.. And some track events.
Any thoughts
Thanks Kirk
Here is a link to our Monster Clutches on sale:
http://www.tickperformance.com/categ...eatured&page=5
Thread Starter
Teching In
Joined: Nov 2011
Posts: 15
Likes: 0
What did the ls1 t56 come out of, im assuming a 98-02 Fbody??? If so we have Monster Clutches on Sale to the end of March. A Monster setup in there would be the way I would go. The level 3 is still a very streetable clutch that you could take to the strip and hammer on. The level 2 clutch is pretty much just like the factory feel and would do well for street abuse!!!
Here is a link to our Monster Clutches on sale:
http://www.tickperformance.com/categ...eatured&page=5
Here is a link to our Monster Clutches on sale:
http://www.tickperformance.com/categ...eatured&page=5
Orange, what kind of track work does the car see? Drag or Road-race? I'm certain that one of our 7 stages of clutch kit, steel or aluminum flywheel, and even our Billet-Aluminum pressure-plate option could easily meet your needs. Check the link below and let me know if you have any further questions. Thanks!!
http://www.specclutch.com/cars/Chevy/Camaro/2000/Single
http://www.specclutch.com/cars/Chevy/Camaro/2000/Single
