Manual Transmission T56 | T5 | MN12 | Clutches | Hydraulics | Shifters

Reverse trouble

Thread Tools
 
Search this Thread
 
Old Jun 26, 2012 | 08:40 AM
  #1  
foxriderry's Avatar
Thread Starter
Staging Lane
iTrader: (3)
 
Joined: Jan 2008
Posts: 90
Likes: 0
From: camp lejeune nc
Default Reverse trouble

So I have been having some trouble getting into reverse lately, some of my friends seem to think its the lockout sensor, Ive flushed the transmission and bled the clutch, basically it will go into reverse it's just requiring 2 hands and some force, however it will go into all the other gears just fine, also the stick itself is gettinging really hot, anyone have any ideas? It's an 02 ss t56
Reply
Old Jun 26, 2012 | 10:34 AM
  #2  
L84ARACE's Avatar
Staging Lane
iTrader: (1)
 
Joined: Jun 2012
Posts: 66
Likes: 0
Default

I have the same problem but if i roll forward a little it goes in . i'm curious myself !
Reply
Old Jun 27, 2012 | 07:36 PM
  #3  
sheaadams86's Avatar
On The Tree
 
Joined: Feb 2012
Posts: 160
Likes: 0
Default

I did have the same issue, and after I bleed system it fixes and comes back like a week or 2 later, if reverse won't go in I found that if u put it in 1st while holding clutch whole time then put it in reverse it will go in, my stick still gets hot but not as much now
Reply




All times are GMT -5. The time now is 02:48 AM.