Infinite amount of air?
Thread Starter
Staging Lane
Joined: Oct 2012
Posts: 59
Likes: 0
From: Woodbury, MN
Infinite amount of air? I'm currently working on my camaro, installing a new tick master cylinder. Its all bolted up and bled. I'm having problems though. In the top of the petal there is a dead spot. When I am in the car pumping JUST that dead spot air will come into the reservoir. It seems as there is a infinite amount of air in the system. When Im pumping just the dead spot I hear this noise, it sounds like air hissing, and almost every time I hear that noise my dad sees a bubble go into the reservoir. Are they related? I know its bled good. I bled the master before connecting to slave cylinder then used the speed bleeder and bled through over half of a water bottles worth of brake fluid through the system. So what should I do?
Thanks
Thanks
Thread Starter
Staging Lane
Joined: Oct 2012
Posts: 59
Likes: 0
From: Woodbury, MN
So that is normal? Is it normal for air to come out of the reservoir when I pump that dead spot. Also when I had the master disconnected from the slave it was rock hard, other that that dead spot.
