Dying when idling down to stop????
Thread Starter
Teching In
Joined: Jan 2023
Posts: 7
Likes: 1
Dying when idling down to stop???? I build a small cam 6.0 for my Silverado it has the nv3500 behind it and when you are coming to a stop it wants to idle down and die almost every time don’t have a clue why it is doing that
TECH Fanatic
Joined: Jul 2022
Posts: 1,041
Likes: 392
From: Alaska
Set spark advance to 32 degrees through the lowest RPM column on all three tables: Low octane , High Octane and closed throttle Idle .
This will act as a " Stall Saver "
( Assuming you have already cleaned and zeroed AIC, if equipped )
This will act as a " Stall Saver "
( Assuming you have already cleaned and zeroed AIC, if equipped )
TECH Addict
Joined: Dec 2004
Posts: 2,178
Likes: 627
From: Florida
You need to adjust the throttle cracker and throttle follower tables.
add iac position/counts to your data log and get a log of you driving around and little bit and it trying to die. Then post that log with your tune.
add iac position/counts to your data log and get a log of you driving around and little bit and it trying to die. Then post that log with your tune.
