Manual Transmission T56 | T5 | MN12 | Clutches | Hydraulics | Shifters

output seal gasket leak

Thread Tools
 
Search this Thread
 
Old Jan 10, 2026 | 07:30 AM
  #1  
camoz28's Avatar
Thread Starter
Teching In
 
Joined: Sep 2025
Posts: 4
Likes: 0
Default output seal gasket leak


Hello everyone, new gasket and new yoke, but there is still a leak, it increases mainly during sudden accelerations, I can tell this by the smell. The bushing is holding up fine. But the yoke seems very close to the seal, could it be hitting it while rotating and causing oil to leak because of that? NOTe: normal ride height photo shot thanks
Reply
Old Jan 12, 2026 | 05:02 PM
  #2  
jmd's Avatar
jmd
TECH Addict
20 Year Member
Photogenic
Liked
Loved
iTrader: (4)
 
Joined: May 2002
Posts: 2,620
Likes: 36
From: T56th Street, Aridzona
Default

Magnum? Your drive line is too long.
Reply
Old Jan 12, 2026 | 07:27 PM
  #3  
camoz28's Avatar
Thread Starter
Teching In
 
Joined: Sep 2025
Posts: 4
Likes: 0
Default

Yes, Magnum, and a custom driveshaft. But I have adjustable arms. From what I've read, there should be at least a 1'' clearance, I think??
Reply




All times are GMT -5. The time now is 02:24 PM.