Gen4 Auto to manual trans coversion...possible???
Thread Starter
Teching In
Joined: Sep 2003
Posts: 48
Likes: 0
From: Pacifica California
Gen4 Auto to manual trans coversion...possible??? Hi,
I’m about to buy another Gen4 z28, but it is a SSP, and has an automatic. I want to swap the auto out and put in a 6sp.
Is this possible?
Any PCM issues?
What about SMOG issues?
Any info is greatly appreciated.
Thanks ahead of time guys!
John
I’m about to buy another Gen4 z28, but it is a SSP, and has an automatic. I want to swap the auto out and put in a 6sp.
Is this possible?
Any PCM issues?
What about SMOG issues?
Any info is greatly appreciated.
Thanks ahead of time guys!
John
TECH Apprentice
Joined: Oct 2003
Posts: 308
Likes: 0
From: Rochester, NY
See the sticky thread at the top of this section. Yes it's possible and has been done many times. You will need about $2,000 worth of parts and the PCM needs to be reflashed for a M6 which can be done at any speed shop or through LS1 edit I believe.
