I just finshed installing my street twin clutch again. I had to reshim it. It was dragging very bad. Now it is dragging only a tiny bit. It lets me into all of the gears, but it won't just slip into gear like I know it should. If I jack the rear wheels off the ground and go through the gears the tires will spin with the clutch in and the shifter in first. That is how I know it is dragging. It's not hanging enough to spin the wheels in 3rd or 4th.

The clutch only has 50 miles total on it and 5 miles on it since I reshimmed it. Could this be something that will go away with a little breakin? I'm not so sure.