bleeding
Thread Starter
On The Tree
Joined: Oct 2004
Posts: 172
Likes: 0
From: Michigan
bleeding im in the middle of my clutch install right now...is there any site that has a write up on bleeding the trans and all of that....do i for sure have to do that when just doing a clutch? thanks guys
Have you replaced any of the clutch hydraulics or opened the system at all (disconnected the clave from the master)? If you are only replacing the clutch disk and pressure plate you would not need to bleed the hydraulics. It would not hurt to do it, especially if you clutch pedal felt soft or spongy before with the old clutch.
So the answer is maybe
jk
So the answer is maybe
jk Thread Starter
On The Tree
Joined: Oct 2004
Posts: 172
Likes: 0
From: Michigan
no im not doing any of that im jsut doing the clutch and pressure plate...that makes me feel better knowing i dont have to bleed anything now..my clutch felt normal with my old clutch so i think im aright.
