bleeding slave cylinder
Thread Starter
Teching In
Joined: Feb 2005
Posts: 48
Likes: 0
From: oakland cali
bleeding slave cylinder does anyone khow to bleed the slave cylinder externaly,i installed a clutch last nite and when i push the clutch pedal theres no preasure
Last edited by silvernblackcamaro; Jun 18, 2005 at 11:16 AM.
Theres a bleeder valve just above the hydro line that runs into the slave. It's kind of a bitch to get to but that's the only way you're going to do it externally. You won't be able to see it you'll just have to feel it. You'll need at least one other person preferably two. When I lost pressure through my clutch I also had to bench bleed my MC. Do a search for more detailed info there's plenty of it out there.
