Manual Transmission T56 | T5 | MN12 | Clutches | Hydraulics | Shifters

Anyone using McLeod Iron Disk?

Thread Tools
 
Search this Thread
 
Old 01-08-2002 | 11:06 AM
  #1  
01 NBM DEMON's Avatar
Thread Starter
On The Tree
 
Joined: Dec 2001
Posts: 103
Likes: 0
From: Boynton Beach FL
Default Anyone using McLeod Iron Disk?

Was browsing on Thunders Website and saw that in McLeods line up for only $420 and uses stock hydralics. So i was wondering if anybody has had an success with it or has tried it. All info would be greatly appreciated.

[ January 08, 2002: Message edited by: 01 NBM DEMON ]</p>
Old 01-08-2002 | 12:06 PM
  #2  
Fireball's Avatar
TECH Senior Member
iTrader: (21)
 
Joined: Nov 2001
Posts: 8,484
Likes: 0
From: Cecil County Raceway!!!
Default Re: Anyone using McLeod Iron Disk?

I didn't know it was released yet. I believe I have the first or second test clutch out there. We have 2 locally here (mine and a C5 vette) and both are working great.

One word of caution, this thing grabs and grabs hard. Jerky starts are very easy and launching it can be a bit tricky since it snaps soooo hard. But it HOLDS <img src="gr_stretch.gif" border="0">
Old 01-08-2002 | 04:21 PM
  #3  
01 NBM DEMON's Avatar
Thread Starter
On The Tree
 
Joined: Dec 2001
Posts: 103
Likes: 0
From: Boynton Beach FL
Default Re: Anyone using McLeod Iron Disk?

Good to hear it holds alot of power. It is exactly what i am looking for power i should be putting down on the NOS thanks for the info guys
Old 01-09-2002 | 01:58 AM
  #4  
Sears's Avatar
!Dial-up Director
 
Joined: Nov 2001
Posts: 3,100
Likes: 1
From: Louisiana
Default Re: Anyone using McLeod Iron Disk?

I've had mine in for a couple of months. It has held up fine so far to rev limiter dumps on slicks. Like Fireball said it grabs HARD! Jason99TA is also runing this clutch.

I also have a Mcleod Adjustable master cylinder.

Justin

[ January 08, 2002: Message edited by: Jsears8 ]</p>



Quick Reply: Anyone using McLeod Iron Disk?



All times are GMT -5. The time now is 11:37 AM.