Need Help!!!

Reply Subscribe

Thread Tools

Search this Thread

Nov 11, 2005 | 08:29 AM

1996WS6

Thread Starter

On The Tree

iTrader: (-1)

Joined: May 2004

Posts: 101

Likes: 0

Need Help!!!

I drive a 2000 Trans am with 73K miles on it. well yesterday i was driving and when i put the car into 3rd gear it shot hte stick out of gear. At first i didnt think anything of it. Then later that night i was driving and all of a sudden it didnt want to go into 1st, 3rd, or reverse. i know my clutch is going out because it started slipping not to long ago. It was not slipping last night and i know it cant be the sencronizers because i know the car hasnt been ragged out. If anyone knows what could be the problem please help

Thanks kev

Nov 11, 2005 | 10:15 AM

Boosted One

9 Second Club

iTrader: (6)

Joined: Aug 2002

Posts: 886

Likes: 0

From: Cecil County, MD

A slipping clutch should make the tranny pop out of gear, unless it is not engaging all the way. First thing you have to do is replace that clutch. THere is a chance that your sycro keys became dislodged also, which happens alot, so it's up to you if you tear into the tranny or not. I would stick a clutch/slave cyl. in it first, try it. If it still does it it's time for a rebuild.

Frank